It has been quite some time since I have done any work on my long-running Enterprise-refit project. This was mostly due to my shifting onto another of my hobbies, the old-school fantasy RPG called Hârn, which I have collected since 1983. Earlier this year we decided to move the home office from one room in the house to another. Having move boxes and boxes of printed material collected in numerous 3-ring binders and such, prompted me to begin to digitize it all so I could move all the Hârn material into storage. Needless to say the boxes I opened when moving turned out to be more of a Pandora’s box, in that I began converting it all into a fully interlinked wiki called Hârnica. So I have spent pretty much the last year doing that. I am still only about a 1/3rd of the way through it all and it has evolved into another of my “eternal hobbies”.Continue reading
Tag Archives: Constitution-class
Hangin’ on the Intercom…
After a brief hiatus from working on the detailing of the Enterprise-refit‘s recreation deck, I jumped back into it and modeled the multimedia intercom panel as well as made some corrections on the sidewall buttress light-panels. In addition, I finished drawing up the artwork for the alcove signage for the remaining five alcoves.
A Little Recreation
I took a break from modeling the Workbee to begin roughing out the 3D modeling of the Recreation Deck on the Enterprise-refit from Star Trek: The Motion Picture (TMP). This was one of the more visually interesting sets built for the film, but also the most problematic one for us rivet-counting Treknolgists.Continue reading
This past week I began working on the generic corridor sections beginning with the “curved” radial sections as produced in Lora Johnson‘s Mr. Scott’s Guide to the Enterprise as well as the numerous photo references and blu-ray screencaps. I did this to begin to try and reconcile the deck levels in the primary hull, which obviously impact how the deck and window levels within the bridge superstructure are arranged which I have been working on for some time.
Getting Back To It
Well back in December I had a motherboard and drive issue with my iMac, and after that, was my son coming home for the holiday, then I took a slight break from the workbee while I still try and get better reference material for the aft view of it as well as the enigmatic bottom view.